FoxESS EV Charging Station 7.3 kW Single-Phase Type 2 Socket WiFi Bluetooth RFID Black
Secure Checkout
Pickup available at Sede Operativa Oniroview Usually ready in 24 hours
Pickup available
-
Sede Operativa Oniroview
Pickup available, usually ready in 24 hours
Via Piave 17
Check in google map
95129 Catania CT
Italy
FoxESS EV Charging Station 7.3 kW Single-Phase Type 2 Socket WiFi Bluetooth RFID Black
📐 7.3 kW single-phase (230 V, 32 A) │ Type 2 socket — cable not included │ IP54 / IK08 — 🔧 Installation difficulty: 3/5 │ 🎯 Ideal for: private garages and parking spaces, those who already have a Type 2 cable or charge different vehicles
✅ Eligible for the 2026 Home Charging Station Bonus — Available now
The FoxESS A7300S1-E model is on the GSE list of charging devices with Dynamic Load Management (October 2026 update), a requirement to access the MIMIT grant.
- 💶 80% grant on purchase and installation: up to €1,500 for resident individuals, up to €8,000 for condominiums
- 📅 Installation completed between June 26 and December 31, 2026
- 📝 Application on the Invitalia platform by January 31, 2027, first-come, first-served until funds run out
The bonus cannot be claimed by companies and sole traders and cannot be combined with other incentives for the same expenses. The model must be on the GSE list valid on the day of application: download the list updated at the time of submission.
FoxESS 7.3 kW Wallbox with Type 2 socket: the charging station without a fixed cable
Those who already have a Type 2 cable, or need to charge cars with charging ports in different locations, do not need a fixed cable hanging on the wall: they need a socket. The A7300S1-E1 is the version with a Type 2 socket in the FoxESS A series: 7.3 kW at 230 V, app control via Wi-Fi or Bluetooth, and RFID card start. The charging cable is not included and must be purchased separately; if you prefer the integrated cable, there is the A7300P1-E1-S version with a 6 m cable.
Technical analysis and advantages
- 🔌 Type 2 socket (IEC 62196-2): accepts any Mode 3 Type 2 cable of the length you need; if the cable wears out, you only replace that.
- ⚡ 7.3 kW on a 230 V single-phase line with 32 A: about twice the 3.7 kW of a 16 A home socket charge.
- 📱 FoxESS app control via 2.4 GHz Wi-Fi or Bluetooth, even where the home signal does not reach the garage.
- 🔐 Three start modes: Plug & Charge, Mifare ISO/IEC 14443 A RFID card, and app.
- 🛡️ Integrated protections: 6 mA DC residual current detection, overcurrent, grounding, overvoltage, and overtemperature. IP54 and IK08, operating from -25 °C to +50 °C.
Technical specifications
| Model | A7300S1-E1 (A-Series, socket version) |
| Charging power | 7.3 kW |
| Power supply | Single-phase L/N/PE — 230 Vac ±20% — 50/60 Hz |
| Maximum current | 32 A |
| Connector | Type 2 socket (IEC 62196-2) — charging cable not included |
| Start modes | Plug & Charge / RFID card / app |
| RFID reader | Mifare ISO/IEC 14443 A |
| Communication | Bluetooth + 2.4 GHz Wi-Fi |
| OCPP / 4G / LAN | Not present |
| Protection rating | IP54 / IK08 |
| Protections | 6 mA DC residual current, overcurrent, grounding, overvoltage, overtemperature |
| Operating temperature | -25 °C / +50 °C |
| Humidity / altitude | 5-95% non-condensing / up to 2000 m |
| Installation | Wall or pole mounted |
| Color | Black |
| Certifications | CE / UKCA, RoHS, EN/IEC 61851-1:2019 |
| Home Charging Station Bonus 2026 | Yes — A7300S1-E model on the GSE list (GDC), October 2026 |
| SKU | FE-A7300S1-E1 |
| EAN | — |
🧠 Expert Advice:
With the socket version, you choose the cable, and that choice determines the actual power. In the store, I always recommend a 32 A Mode 3 Type 2–Type 2 cable: if you get a 16 A one, the charging will be limited to half power, because the charging station reads the cable's capacity and adjusts accordingly. For the length, 5 m is almost always enough if the charging station is in front of the charging port; if one day you switch to three-phase, a 32 A three-phase cable also works on this single-phase charging station, so you can keep it.
Complete your installation
- 🔗 FoxESS Type 2 22 kW three-phase 5 m charging cable — 32 A, full power charging today and valid on a future three-phase wallbox.
- 🔗 FoxESS Type 2 7 kW single-phase 5 m charging cable — the most economical option if you stay on single-phase.
- 🔗 Eastron SDM120CT meter with 100A CT or FoxESS DDSU666 meter — for dynamic load balancing via RS485.
Frequently Asked Questions
Is this charging station eligible for the 2026 Home Charging Station Bonus?
Yes. The A7300S1-E model is on the GSE list of charging devices equipped with Dynamic Load Management (October 2026 update). The grant covers 80% of the purchase and installation costs, up to €1,500 for individuals, for installations completed between June 26 and December 31, 2026. The application is submitted on Invitalia by January 31, 2027, and is first-come, first-served: it is advisable to submit it as soon as the installation is completed.
Is the charging cable included?
No. This version has the Type 2 socket on the charging station and requires a Mode 3 Type 2–Type 2 cable to be purchased separately. To charge at 7.3 kW, the cable must be 32 A: with a 16 A cable, the charging station automatically limits the current and the power drops to about 3.7 kW.
Can I install a wallbox with a Type 2 socket in Italy?
Yes, but with one extra check. The national conditions of the EN 62196-2 standard provide for sockets with shutters (IPXXD rating) in Italy when they are accessible to ordinary people, such as in a home garage. Before installation, check with the installer the conformity of the socket to the installation location according to CEI 64-8 section 722.
What is the difference with the A7300P1-E1-S?
Same power and same basic electronics. The P1-E1-S has the 6 m Type 2 cable fixed to the charging station; the S1-E1 has the socket and leaves the choice of cable free, useful if you charge different cars or already have a cable.
Package contents
📦 1 FoxESS 7.3 kW charging station with Type 2 socket · backplate and mounting bracket · 2 RFID cards · wall plugs, fixing screws, and tubular terminals. Charging cable not included.
Warranty and safety
✅ CE / UKCA, RoHS, compliant with EN/IEC 61851-1:2019. 📜 2-year legal warranty (Legislative Decree 170/2021). ⚠️ Installation reserved for qualified personnel according to CEI 64-8 section 722; an external residual current circuit breaker is required based on local regulations.
Shipping from Catania. Technical assistance for app configuration, RFID cards, and Type 2 cable selection.
Changed your mind? Here's what to do
If you want to return your order, we're here to help. You have the right to withdraw from the purchase within 14 days of delivery, without having to provide any reason.
Right of withdrawal (within 14 days)
The deadline is 14 days from delivery. If the order includes multiple items delivered separately, the deadline starts from the delivery of the last item.
The 14 days are calculated in calendar days, including Saturdays, Sundays, and public holidays. If the last day falls on a Saturday, Sunday, or public holiday, the deadline is extended to the next working day.
How to exercise it: Initiate the request from the dedicated function in your account: https://account.oniroview.com → Orders section → "Manage" → "Request Return". The withdrawal is validly exercised at the moment you send the online request; it is not subject to our prior authorization.
- Return: You must send the products back within 14 days from the date you notified us of the withdrawal.
- Refund: We will refund you within 14 days of the withdrawal notification. We may withhold the refund until we have received the goods or proof of their shipment, whichever occurs first.
- Full withdrawal (you return all products in the order): 100% refund of the price plus standard outbound shipping costs. If you chose a more expensive delivery than the standard one at the time of the order, any supplement is not refundable.
- Partial withdrawal (you return only some products): refund of the price of only the returned products; outbound shipping costs are not refunded. If the order benefited from free shipping due to reaching a threshold and the partial return causes the value to fall below that threshold, the corresponding shipping cost will be calculated and deducted from the refund.
- Return costs: The direct costs of return are borne by the customer.
- Diminution in value: You are only responsible for any diminution in the value of the goods resulting from handling other than what is necessary to establish their nature, characteristics, and functioning. In such a case, we will deduct from the refund an amount corresponding to the ascertained lost value.
The refund will be made using the same payment method used for the purchase.
Exclusions from the right of withdrawal
Pursuant to Article 59 of the Consumer Code, withdrawal does not apply to:
- goods made to measure or clearly personalized (e.g., cables cut to size, custom configurations);
- sealed goods that are not suitable for return for hygienic reasons or health protection, if unsealed after delivery;
- digital content supplied on a non-material medium, if the performance has begun with your prior consent and acceptance of the loss of the right of withdrawal.
Outlet Items: Items in the Outlet category are sold as final sale and are not returnable.
B2B Sales: The right of withdrawal does not apply to contracts concluded with customers holding a VAT number.
How to ship the return
Once the request has been submitted, send all items to: Oniroview, Via Piave 17, 95129 Catania (CT), Italy.
- Pack carefully and use secure, tracked shipping: products lost or damaged during return transit cannot be refunded.
- To protect the original packaging, place it in a second box when possible. Do not apply labels or adhesive tape directly to the product's original packaging.
Tax deductions and benefits for ordinary and extraordinary maintenance
To request tax breaks, send your request to the email address: amministrazione@oniroview.com
IRPEF deductions at 50%
You are entitled to a 50% deduction for the purchase of products connected to building interventions, such as electrical systems, video intercoms and alarm systems and LED lighting. It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate the desired deduction in the order notes.
- Make the payment via bank transfer, compliant with the provisions of the Revenue Agency. The transfer must include:
- Reason for payment (include order number and date)
- Oniroview tax code and/or VAT number: 05660420877
- Tax code of the payer
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
10% reduced VAT for building renovations and conservative renovations ( 10% REDUCED VAT - 50% TAX DEDUCTION)
Purchase of goods, with the exclusion of raw materials and semi-finished products, used in conservative restoration and building renovation. Use for the purchase of LED lighting is permitted .
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for renovation and restoration, VAT 10%" in the same 'Order note' field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT reduced at 4% for the construction of the first non-luxury home
The use of LED lighting for the purchase of non-luxury properties is permitted (the property must not have luxury characteristics, according to the criteria indicated in the decree of 2 August 1969).
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for the facilitation of construction of a first home, VAT 4%" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
Furniture Bonus
Purchase of Furniture and Appliances, including LED lighting for private individuals and condominiums. Legislative decree no. 63/2013 introduced a further 50% deduction for the purchase of furniture and large appliances and LED lighting, aimed at furnishing properties undergoing renovation.
The main prerequisite for obtaining the deduction is the carrying out of a recovery intervention on the building heritage (renovation, restoration, etc.).
It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and "advance invoice for mobile bonuses" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT exemption with Reverse Charge and Split Payment
To take advantage of reverse charge and split payment on Oniroview.com, Public Administration suppliers and companies that perform services through procurement and subcontracting contracts must follow this procedure:
- Complete the order on our website by selecting "Bank transfer" as the payment method.
- Specify in the order notes that you have the necessary documentation for VAT-free payment.
- Send the documentation to facilitazioni@oniroview.com , including the order reference.
After verifying the documentation, we will issue an advance invoice with the reduced VAT to proceed with the payment.




