1080p 50mt hdmi ethernet extender on active cat.5e / 6 cable with infrared remote control repeater
Secure Checkout
Pickup available at Sede Operativa Oniroview Usually ready in 24 hours
Pickup available
-
Sede Operativa Oniroview
Pickup available, usually ready in 24 hours
Via Piave 17
Check in google map
95129 Catania CT
Italy
1080p 50mt hdmi ethernet extender on active cat.5e / 6 cable with infrared remote control repeater
📐 1080p@30Hz up to 50 m · 1080p@60Hz up to 30 m │ 1 Cat.5e/6 cable (IEEE-568B) │ 20-60 kHz IR repeater — 🔧 Installation difficulty: 2/5 │ 🎯 Ideal for: decoder in another room, TV in a pub or attic, surveillance monitor
HDMI extender over Ethernet cable: 1080p up to 50 metres with remote control return
Beyond 15 m, an HDMI cable can no longer carry the signal, and threading a pre-terminated cable through conduit is often impossible. The CT373/9 transmits HDMI over a single Cat.5e/6 network cable: 50 m at 1080p@30Hz, 30 m at 1080p@60Hz. This is the basic version, with an IR repeater and two power supplies; if you also need a screen next to the source, choose a version with loop-out.
Who chooses it
- Anyone who watches the living room decoder on a TV in another room and wants to change channels with the original remote control.
- Installers with only one free conduit, through which a network cable can pass but not a terminated HDMI cable.
- Waiting rooms and surveillance systems with the monitor far from the recorder.
It is not the right choice if the source is 4K or if you need a second HDMI output near the transmitter.
Technical analysis and benefits
- 📏 50 m over a network cable — more than three times the 15 m beyond which a passive HDMI cable loses the signal, according to the manufacturer's data.
- 🔌 A single Cat.5e/6 IEEE-568B cable — standard cabling: one RJ45 plug on each end, terminated in the field after installation.
- 📡 20-60 kHz IR repeater — the remote control pointed at the receiver controls the source; the band includes the 38 kHz carrier used by most remote controls.
- ⚡ Two 5V 1A power supplies included — the transmitter and receiver amplify and equalise the signal, each with its own power supply.
- 🎬 10.2 Gbps — the bandwidth of a High Speed HDMI: suitable for Full HD, not 4K.
- 🔧 Plug-and-play — no drivers or software: connect the HDMI, network cable and power supplies.
Technical specifications
| Type | Transmitter + Receiver |
| Maximum resolution | 1080p @ 60Hz |
| Supported resolutions | 480i@60Hz, 480p@60Hz, 576i@60Hz, 576p@60Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@30Hz, 1080p@50/60Hz |
| Maximum distance | 50 m up to 1080p@30Hz · 30 m at 1080p@60Hz 8-bit (AWG24 cable) |
| Connection cable | 1x Cat.5e/6, IEEE-568B standard |
| Bandwidth | 10.2 Gbps |
| Colour depth | 8-bit/channel |
| 3D / 4K compatible | No / No |
| IR transmission | 20-60 kHz, cables with 3.5 mm jack |
| Transmitter connections | HDMI input, RJ45, 3.5 mm IR output jack |
| Receiver connections | HDMI output, RJ45, 3.5 mm IR input jack |
| Power supply | 2x 5Vdc 1A, 5.5×2.1 mm plug, centre positive |
| Installation | Plug-and-play, no drivers |
| IR over HDMI cable | Not supported (CT500 accessories not compatible) |
| Manufacturer | AlphaNET |
| SKU | CT373/9 |
| EAN | — |
🔍 Expert's Advice:
To reach 50 m, measure the actual cable path including rises and bends, not the straight-line distance, and use Cat.6 AWG24 solid copper as recommended by the manufacturer. If the decoder outputs at 1080p@60Hz, the limit drops to 30 m: to cover longer distances, set the output to 1080i or 1080p@30Hz from the source's video menu.
Complete your project
- 🔗 305 m Cat.6 U/UTP solid copper cable reel — the solid copper cable recommended by the manufacturer to achieve the stated distances.
- 🔗 Cat.6A tool-less RJ45 plug — terminate the cable after installation without a crimping tool.
- 🔗 HDMI 1080p loop-out PoE (CT373/9/1) extender — adds an output for a local screen and uses a single power supply.
Frequently asked questions
Does an HDMI extender over Ethernet cable work with a Sky decoder?
Yes, up to 1080p: the decoder outputs via HDMI and the transmitter converts the signal to the network cable. With the IR receiver cable near the remote TV, you can change channels with the original remote control, while the IR transmitter in front of the decoder repeats the command. If the decoder is set to 4K, set it to 1080p: this model does not support 4K.
Can I connect the HDMI extender to my home LAN or a switch?
No. The transmitter and receiver connect point-to-point with a single cable, without switches or routers in between: the signal travelling over the pair is not IP network traffic. You can use RJ45 wall sockets and passive patch panels, provided the overall length remains within 50 m at 1080p@30Hz and 30 m at 1080p@60Hz.
What cable is needed for an HDMI extender over Ethernet?
A Cat.5e or Cat.6 cable terminated to the IEEE-568B standard on both ends. The stated distances of 50 m and 30 m refer to AWG24 cable, and the manufacturer recommends at least Cat.6 solid copper. The useful distance may be reduced on copper-clad aluminium (CCA) or smaller-gauge cables.
Package contents
📦 1x Transmitter · 1x Receiver · 2x 5Vdc 1A power supplies · 1x IR receiver cable · 1x IR transmitter cable
Warranty and safety
📜 2-year legal warranty (Italian Legislative Decree 170/2021). ⚠️ Install the transmitter and receiver in an indoor, dry environment. Point-to-point connection only, without intermediate network devices. The device does not transmit IR over HDMI cable.
Ships from Catania. Technical support for HDMI extenders and network cabling.
Changed your mind? Here's what to do
If you want to return your order, we're here to help. You have the right to withdraw from the purchase within 14 days of delivery, without having to provide any reason.
Right of withdrawal (within 14 days)
The deadline is 14 days from delivery. If the order includes multiple items delivered separately, the deadline starts from the delivery of the last item.
The 14 days are calculated in calendar days, including Saturdays, Sundays, and public holidays. If the last day falls on a Saturday, Sunday, or public holiday, the deadline is extended to the next working day.
How to exercise it: Initiate the request from the dedicated function in your account: https://account.oniroview.com → Orders section → "Manage" → "Request Return". The withdrawal is validly exercised at the moment you send the online request; it is not subject to our prior authorization.
- Return: You must send the products back within 14 days from the date you notified us of the withdrawal.
- Refund: We will refund you within 14 days of the withdrawal notification. We may withhold the refund until we have received the goods or proof of their shipment, whichever occurs first.
- Full withdrawal (you return all products in the order): 100% refund of the price plus standard outbound shipping costs. If you chose a more expensive delivery than the standard one at the time of the order, any supplement is not refundable.
- Partial withdrawal (you return only some products): refund of the price of only the returned products; outbound shipping costs are not refunded. If the order benefited from free shipping due to reaching a threshold and the partial return causes the value to fall below that threshold, the corresponding shipping cost will be calculated and deducted from the refund.
- Return costs: The direct costs of return are borne by the customer.
- Diminution in value: You are only responsible for any diminution in the value of the goods resulting from handling other than what is necessary to establish their nature, characteristics, and functioning. In such a case, we will deduct from the refund an amount corresponding to the ascertained lost value.
The refund will be made using the same payment method used for the purchase.
Exclusions from the right of withdrawal
Pursuant to Article 59 of the Consumer Code, withdrawal does not apply to:
- goods made to measure or clearly personalized (e.g., cables cut to size, custom configurations);
- sealed goods that are not suitable for return for hygienic reasons or health protection, if unsealed after delivery;
- digital content supplied on a non-material medium, if the performance has begun with your prior consent and acceptance of the loss of the right of withdrawal.
Outlet Items: Items in the Outlet category are sold as final sale and are not returnable.
B2B Sales: The right of withdrawal does not apply to contracts concluded with customers holding a VAT number.
How to ship the return
Once the request has been submitted, send all items to: Oniroview, Via Piave 17, 95129 Catania (CT), Italy.
- Pack carefully and use secure, tracked shipping: products lost or damaged during return transit cannot be refunded.
- To protect the original packaging, place it in a second box when possible. Do not apply labels or adhesive tape directly to the product's original packaging.
Tax deductions and benefits for ordinary and extraordinary maintenance
To request tax breaks, send your request to the email address: amministrazione@oniroview.com
IRPEF deductions at 50%
You are entitled to a 50% deduction for the purchase of products connected to building interventions, such as electrical systems, video intercoms and alarm systems and LED lighting. It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate the desired deduction in the order notes.
- Make the payment via bank transfer, compliant with the provisions of the Revenue Agency. The transfer must include:
- Reason for payment (include order number and date)
- Oniroview tax code and/or VAT number: 05660420877
- Tax code of the payer
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
10% reduced VAT for building renovations and conservative renovations ( 10% REDUCED VAT - 50% TAX DEDUCTION)
Purchase of goods, with the exclusion of raw materials and semi-finished products, used in conservative restoration and building renovation. Use for the purchase of LED lighting is permitted .
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for renovation and restoration, VAT 10%" in the same 'Order note' field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT reduced at 4% for the construction of the first non-luxury home
The use of LED lighting for the purchase of non-luxury properties is permitted (the property must not have luxury characteristics, according to the criteria indicated in the decree of 2 August 1969).
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for the facilitation of construction of a first home, VAT 4%" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
Furniture Bonus
Purchase of Furniture and Appliances, including LED lighting for private individuals and condominiums. Legislative decree no. 63/2013 introduced a further 50% deduction for the purchase of furniture and large appliances and LED lighting, aimed at furnishing properties undergoing renovation.
The main prerequisite for obtaining the deduction is the carrying out of a recovery intervention on the building heritage (renovation, restoration, etc.).
It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and "advance invoice for mobile bonuses" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT exemption with Reverse Charge and Split Payment
To take advantage of reverse charge and split payment on Oniroview.com, Public Administration suppliers and companies that perform services through procurement and subcontracting contracts must follow this procedure:
- Complete the order on our website by selecting "Bank transfer" as the payment method.
- Specify in the order notes that you have the necessary documentation for VAT-free payment.
- Send the documentation to facilitazioni@oniroview.com , including the order reference.
After verifying the documentation, we will issue an advance invoice with the reduced VAT to proceed with the payment.
