UPS Line Interactive 3000VA - 2100W - for 19 Inch Rack and Tower

Stabilized UPS 3000VA - 2100W - Line interactive rack mounting

The JOpower UPS of the KUPS series are uninterruptible power supplies with Line Interactive technology with sinusoidal output with low frequency technology and electronic AVR voltage stabilization circuit .
19 "Rack (2U) or Tower installation - non-orientable display
Battery recharging system managed by microprocessor and USB HID interface.

They are able to supply power between 1200VA and 3000VA. They are made with microprocessor control and are equipped with an integrated self-diagnostic function and cold start function.
The 2200VA rack or tower mount version has 8 VDE IEC320 C13 three-pole sockets.

Line Interactive technology is identified by the abbreviation VI (Voltage Independent) . This means that in the presence of mains, the UPS output frequency is dependent on the input frequency but the voltage is regulated by the UPS. Through the stabilizer circuit these UPS are able to protect the connected equipment from persistent voltage drops or rises as well as from blackouts.

They are internally equipped with hermetic lead -acid storage batteries regulated by a valve to guarantee a minimum autonomy of 5 minutes at 80% of the load.
The presence of an electronic stabilizer (AVR - Automatic Voltage Regulator) inside the UPS ensures effective protection of the connected loads, against disturbances in the electrical network that can cause malfunctions and damage to the electronics.
Ideal for use for Servers, Workstations, Switches, HUBs, Video Surveillance Systems, Home Theater, TV, HI-FI, Fireplaces.

In addition to ensuring power supply continuity, thanks to the RJ11 / RJ45 sockets, it offers excellent protection for telephone / fax / modem / LAN. They can be connected to a PC via the USB port to detect the status, monitor its operation and perform the emergency shutdown of the Windows / Linux operating systems.
The front LED control panel is able to clearly indicate alarms and operating modes.

System requirements
Grounded wall power connection.
Supported devices: Small servers, PCs, Monitors, Switches, HUBs, Video surveillance systems

Battery type: Lead acid, sealed, maintenance free
Indicative autonomy: 17min (25%) - 6min (50%) - 3min (75%) - 1min (100%)
The backup time may vary according to the absorption of the connected loads.

Connections and views
USB for viewing the operating status via software (supplied).
RJ45 (Network / Fax / Modem) for telephone line protection.
Display for indicating the operating status.

Warnings
The batteries used are sealed lead-acid batteries only.

Battery type: Lead acid, sealed, maintenance free
Indicative autonomy: 17min (25%) - 6min (50%) - 3min (75%) - 1min (100%)
The backup time may vary according to the absorption of the connected loads.

Connections and views
USB for viewing the operating status via software (supplied).
RJ45 (Network / Fax / Modem) for telephone line protection.
Display for indicating the operating status.

Warnings
The batteries used are sealed lead-acid batteries only.

Connections

Input connections	IEC320 C20		Remote control	no
Output connections	8 IEC320 C13 connectors		Installation	rack, vertical / tower

---

Protections

Entrance protections	panel fuses
Output protections	overload, short circuit

---

Mechanical characteristics

Dimensions	430mm x 438mm x 88mm		Protection	IP20
Weight	22 Kg

---

General features

Battery capacity	4 x 7Ah 24V		Brand	JOpower
Output waveform	Pure sine wave		Input voltage	230Vac (165‑295Vac)
Technology	Line-interactive		Output voltage	220-240Vac
Intervention time	4 ms		Typology	Single phase
Frequency	50/60 Hz		Power	3000VA - 2100W
Battery recharge time (90%)	4 hr



Tax deductions and benefits for ordinary and extraordinary maintenance

To request tax breaks, send your request to the email address: amministrazione@oniroview.com

IRPEF deductions at 50%

You are entitled to a 50% deduction for the purchase of products connected to building interventions, such as electrical systems, video intercoms and alarm systems and LED lighting. It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.

The documents to be kept are:

• Bank transfer receipt
• Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code

Procedure to follow:

1. Place an order on our site by selecting "Bank Transfer" as the payment method.
2. Request the invoice and indicate the desired deduction in the order notes.
3. Make the payment via bank transfer, compliant with the provisions of the Revenue Agency. The transfer must include:
   • Reason for payment (include order number and date)
   • Oniroview tax code and/or VAT number: 05660420877
   • Tax code of the payer

In the absence of even one of the two fields indicated above, the order will be processed without invoicing.

10% reduced VAT for building renovations and conservative renovations ( 10% REDUCED VAT - 50% TAX DEDUCTION)

Purchase of goods, with the exclusion of raw materials and semi-finished products, used in conservative restoration and building renovation. Use for the purchase of LED lighting is permitted .

Requested documents:

• Copy of Identity Card

• Copy of valid tax code or health card

• Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated

• Declaration for reduced VAT ( download the form here )

  The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
  
  

Procedure to follow:

1. Place an order on our site by selecting "Bank Transfer" as the payment method.
2. Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for renovation and restoration, VAT 10%" in the same 'Order note' field.
3. Make the payment via bank transfer indicating the invoice number

In the absence of even one of the two fields indicated above, the order will be processed without invoicing.

VAT reduced at 4% for the construction of the first non-luxury home

The use of LED lighting for the purchase of non-luxury properties is permitted (the property must not have luxury characteristics, according to the criteria indicated in the decree of 2 August 1969).

Requested documents:

• Copy of Identity Card

• Copy of valid tax code or health card

• Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated

• Declaration for reduced VAT ( download the form here )

  The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.

Procedure to follow:

1. Place an order on our site by selecting "Bank Transfer" as the payment method.
2. Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for the facilitation of construction of a first home, VAT 4%" in the same field.
3. Make the payment via bank transfer indicating the invoice number

In the absence of even one of the two fields indicated above, the order will be processed without invoicing.

Furniture Bonus

Purchase of Furniture and Appliances, including LED lighting for private individuals and condominiums. Legislative decree no. 63/2013 introduced a further 50% deduction for the purchase of furniture and large appliances and LED lighting, aimed at furnishing properties undergoing renovation.
The main prerequisite for obtaining the deduction is the carrying out of a recovery intervention on the building heritage (renovation, restoration, etc.).

It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.

The documents to be kept are:

• Bank transfer receipt
• Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code

Procedure to follow:

1. Place an order on our site by selecting "Bank Transfer" as the payment method.
2. Request the invoice and indicate in the order notes by writing "your tax code and "advance invoice for mobile bonuses" in the same field.
3. Make the payment via bank transfer indicating the invoice number

In the absence of even one of the two fields indicated above, the order will be processed without invoicing.

VAT exemption with Reverse Charge and Split Payment

To take advantage of reverse charge and split payment on Oniroview.com, Public Administration suppliers and companies that perform services through procurement and subcontracting contracts must follow this procedure:

1. Complete the order on our website by selecting "Bank transfer" as the payment method.
2. Specify in the order notes that you have the necessary documentation for VAT-free payment.
3. Send the documentation to facilitazioni@oniroview.com , including the order reference.

After verifying the documentation, we will issue an advance invoice with the reduced VAT to proceed with the payment.