The 4-input, 4-output HDMI 4K 60Hz 2.0 matrix allows you to direct each input source to each connected TV output.
Compatible with the HDCP 2.2 protocol, this matrix is the classic component that is used to distribute sources such as satellite and DTT decoders, Blu-ray or DVD players, etc. in different rooms of the apartment and/or office.
The 8 in and 8 out hdmi matrix is the definitive solution for restaurants , school teaching , meeting rooms , the hospital sector and video surveillance.
ALL THE RESOLUTION AT YOUR FINGERTIPS
The matrix supports a bandwidth of 18 Gbps and all ultra HD (UHD) video signals up to 4096x2160p with a frequency of 60Hz. The matrix also supports HDR and CEC functions
AUTOMATIC 4K TO 1080P SCALER
All matrix outputs are equipped with a scaler function . Incoming 4K signal is downscaled to 1080p for monitors that require it. The matrix therefore allows an optimized mix of signals at maximum resolution for each monitor without affecting the 4K source.
ADVANCED AUDIO SUPPORT
The matrix is equipped with the latest technology for managing AUDIO EMBEDDED audio output. Audio support up to 7.1 channels ( LPCM, Dolby TrueHD and DTS-HD Master Audio ). It supports simultaneous output of coaxial audio signals and L/RSplitter and HDMI switches
CONTROL VIA WEB PAGES
The matrix can be controlled via the buttons on the front panel, via remote control, via the RS232 serial port and via the web interface. Web pages for configuration and control can be accessed via IP address
ATTENTION TO THE LENGTH OF THE CABLES
The matrix supports the resolutions listed for certain lengths of copper HDMI cables. For greater distances it is necessary to use HDMI fiber optic cables or HDMI extenders.
PLEASE NOTE : in SCALER mode, the matrix does not allow HDR management.
The matrix outputs HDR only if all connected TVs are 4K and both support HDR. Warning: HDR often needs to be enabled in the TV setup menu.
● Fully HDCP 2.2 compliant ● HDMI inputs and HDMI outputs support bandwidths up to 18Gbps ● Route up to eight 4K HDR HDMI sources to eight 4K HDR display devices such as TVs or projectors. ● Support 4K@60Hz 4:2:0 | 4:4:4 and HDR ● Support simultaneous output of coaxial and L/R audio signals. ● Up to 7.1ch audio support (LPCM, Dolby TrueHD and DTS-HD Master Audio) ● Each HDMI output supports upscaling up to 1080p without affecting 4K source content ● Advanced EDID management. ● Control options via IR remote control, buttons, web interface over LAN and RS-232 serial control.
Specifications
- Scaler function from 4K to 1080p
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Dimensions 440x200x44.5mm
- Weight 2,8Kg
- Consumption 43W max
HDMI specifications
- HDCP 2.2 compliant
- 4K@60Hz YUV 4:4:4
- Color space RGB, YCbCr, xvYCC
- Deep Color
- Audio Support PCM2.0ch, PCM5.1ch, PCM7.1ch, DolbyDigital/Plus/EX, Dolby TrueHD, DTS, DTS-EX, DTS-96/24, DTS High RES, DTS-HD Master, Audio, DSD
- Auto lip sync
- Transmission of CEC commands (CEC Bypass)
Package content
1x HDMI Matrix
1x IR remote control
1x 12V 5A power adapter
1x User Manual
1x Mounting Brackets
1x IR Receiver Cable