Outdoor Drive-over LED Ground Spotlight GU10 3.5W CCT IP67 Black Resin CECI 90 2L
Secure Checkout
Pickup available at Sede Operativa Oniroview Usually ready in 24 hours
Pickup available
-
Sede Operativa Oniroview
Pickup available, usually ready in 24 hours
Via Piave 17
Check in google map
95129 Catania CT
Italy
Outdoor Drive-over LED Ground Spotlight GU10 3.5W CCT IP67 Black Resin CECI 90 2L
📐 Ø92 mm · hole Ø85 mm · depth 127 mm │ GU10 CCT 3.5W · 366 lm · included │ Drive-over · IP67 — 🔧 Installation difficulty: 3/5 │ 🎯 Ideal for: driveways, walkways, entrances
Resin inground spotlight with side-blade light emission
The body is not made of metal but of UV-stabilized shockproof resin, immune to rust and corrosion: this is the structural choice that defines this inground garden spotlight, as it eliminates the two ways in which painted steel inground fixtures fail. The cover has two opposing openings that cast light in blades across the walking surface, without pointing upwards. The 3.5W 366 lm GU10 LED bulb is included, TUV-CB certified and replaceable, with Kelvin adjustable to 2700K or 4000K via the switch on the bulb itself.
Who it's for
- 🚗 Those installing it in a driveway: the fixture is rated as drive-over by the manufacturer, with a declared load capacity of up to 5,000 kg.
- 🔁 Those who don't want to throw the unit away: when the LED reaches the end of its life, you only change the GU10; the recessed fixture remains in place.
- 🔌 Those connecting multiple points in series: the housing has a double hole and double waterproof cable gland, designed for daisy-chaining the line.
- ⛔ It's not for you if you need upward lighting for a plant or facade: the light emission here is grazing and lateral. Also, the IP67 rating covers temporary immersion, not permanent underwater installation.
Technical Analysis
- 🛡️ Resin body: shockproof, UV-stabilized, immune to rust and chemical corrosion — unlike painted or galvanized steel inground fixtures.
- 🔩 Drive-over: drive-over rated, up to a declared 5,000 kg.
- 💡 Included source: 3.5W 366 lm GU10 LED, equivalent to a 35W halogen, TUV-CB certified.
- 🌡️ Adjustable Kelvin: 2700K or 4000K selectable on the bulb, with SDCM < 3 — chromatic tolerance within the first MacAdam ellipse, meaning no visible shade variation between light points.
- ⚡ Class II insulation: double insulation, no protective conductor required at the terminal; 100-240V power supply.
- 💧 IP67 sealing: polycarbonate diffuser with silicone rubber gasket, cover with no visible screws.
- 📜 Compliance: CE marking, LVD and EMC directives, EU ErP regulations 2019/2015 and 2019/2020.
🔍 Expert Tip:
Two details that make the difference on site. First: the housing has two cable glands, one for input and one for output, so you can daisy-chain the line from one point to another without inground junction boxes — use this to your advantage when planning the cable route. Second: the Kelvin is set using a micro-switch on the bulb, so decide on the tone before closing the fixture. Perform a dry run, switch it on in the dark, and see: on light stone and stoneware, 2700K remains warm, while on dark paving or concrete, 4000K makes the path more readable. And with blade emission, orient the two openings along the axis of the walkway.
Frequently Asked Questions
What hole size do I need for installation?
The hole in the ground is Ø85 mm and the housing depth is 127 mm; the visible diameter is Ø92 mm, so the cover rests on the finished surface with about a 3.5 mm flange on each side. The resin housing must be fixed to the ground before installing the fixture, so that the unit stays at the correct level while the paving is laid.
Is the bulb included?
Yes. The unit arrives with a 3.5W 366 lumen GU10 LED bulb already included, TUV-CB certified, with Kelvin adjustable between 2700K and 4000K. It is replaceable: at the end of its life, you only change the bulb without removing the fixture from the ground. This is the main advantage over an integrated LED inground unit, where source exhaustion means replacing the entire fixture.
Is grounding required?
No. The unit is Class II, meaning it has double insulation and does not require a protective earth connection. It operates on a 100-240V network. However, it is always good practice to protect the outdoor line with a dedicated residual current circuit breaker.
📦 Package contents: 1 inground spotlight (cover + diffuser + housing) with resin mounting box + 1 CCT 3.5W GU10 LED bulb.
✅ Warranty and safety: CE marking, IP67 protection rating, Class II insulation, UV-stabilized resin, TUV-CB certified bulb. 2-year warranty pursuant to Legislative Decree 170/2021. Direct technical support from Catania.
General Specifications
| Brand | Fumagalli | Series | CECI 90-2L | |
|---|---|---|---|---|
| Code | FU1F20AXU1K | Manufacturer Ref. | 1F2.000.U1K | |
| Cover color | Black | Drive-over | Yes, up to 5,000 kg | |
| Certifications | CE · LVD · EMC · ErP · TUV-CB (bulb) | Origin | Made in Italy |
Electrical Specifications
| Base | GU10 (bulb included) | Power | 3.5 W | |
|---|---|---|---|---|
| Luminous flux | 366 lm | Equivalence | 35W Halogen | |
| Color temperature | CCT adjustable 2700K / 4000K | SDCM | < 3 | |
| Nominal voltage | 100-240 V | Insulation class | Class II | |
| Driver | Integrated in the bulb | Dimmable | no |
Mechanical Specifications
| Visible diameter | Ø92 mm | Recessed hole | ø85 mm | |
|---|---|---|---|---|
| Housing depth | 127 mm | Weight | 0.35 kg | |
| Body material | UV-stabilized shockproof resin | Diffuser | Satin polycarbonate with silicone gasket | |
| Shape | Circular | Emission | 2 side openings | |
| Protection degree | IP67 | Fastening | No visible screws, with mounting box | |
| Cable entries | Double hole with double waterproof cable gland | Mounting | Inground, drive-over |
Changed your mind? Here's what to do
If you want to return your order, we're here to help. You have the right to withdraw from the purchase within 14 days of delivery, without having to provide any reason.
Right of withdrawal (within 14 days)
The deadline is 14 days from delivery. If the order includes multiple items delivered separately, the deadline starts from the delivery of the last item.
The 14 days are calculated in calendar days, including Saturdays, Sundays, and public holidays. If the last day falls on a Saturday, Sunday, or public holiday, the deadline is extended to the next working day.
How to exercise it: Initiate the request from the dedicated function in your account: https://account.oniroview.com → Orders section → "Manage" → "Request Return". The withdrawal is validly exercised at the moment you send the online request; it is not subject to our prior authorization.
- Return: You must send the products back within 14 days from the date you notified us of the withdrawal.
- Refund: We will refund you within 14 days of the withdrawal notification. We may withhold the refund until we have received the goods or proof of their shipment, whichever occurs first.
- Full withdrawal (you return all products in the order): 100% refund of the price plus standard outbound shipping costs. If you chose a more expensive delivery than the standard one at the time of the order, any supplement is not refundable.
- Partial withdrawal (you return only some products): refund of the price of only the returned products; outbound shipping costs are not refunded. If the order benefited from free shipping due to reaching a threshold and the partial return causes the value to fall below that threshold, the corresponding shipping cost will be calculated and deducted from the refund.
- Return costs: The direct costs of return are borne by the customer.
- Diminution in value: You are only responsible for any diminution in the value of the goods resulting from handling other than what is necessary to establish their nature, characteristics, and functioning. In such a case, we will deduct from the refund an amount corresponding to the ascertained lost value.
The refund will be made using the same payment method used for the purchase.
Exclusions from the right of withdrawal
Pursuant to Article 59 of the Consumer Code, withdrawal does not apply to:
- goods made to measure or clearly personalized (e.g., cables cut to size, custom configurations);
- sealed goods that are not suitable for return for hygienic reasons or health protection, if unsealed after delivery;
- digital content supplied on a non-material medium, if the performance has begun with your prior consent and acceptance of the loss of the right of withdrawal.
Outlet Items: Items in the Outlet category are sold as final sale and are not returnable.
B2B Sales: The right of withdrawal does not apply to contracts concluded with customers holding a VAT number.
How to ship the return
Once the request has been submitted, send all items to: Oniroview, Via Piave 17, 95129 Catania (CT), Italy.
- Pack carefully and use secure, tracked shipping: products lost or damaged during return transit cannot be refunded.
- To protect the original packaging, place it in a second box when possible. Do not apply labels or adhesive tape directly to the product's original packaging.
Tax deductions and benefits for ordinary and extraordinary maintenance
To request tax breaks, send your request to the email address: amministrazione@oniroview.com
IRPEF deductions at 50%
You are entitled to a 50% deduction for the purchase of products connected to building interventions, such as electrical systems, video intercoms and alarm systems and LED lighting. It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate the desired deduction in the order notes.
- Make the payment via bank transfer, compliant with the provisions of the Revenue Agency. The transfer must include:
- Reason for payment (include order number and date)
- Oniroview tax code and/or VAT number: 05660420877
- Tax code of the payer
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
10% reduced VAT for building renovations and conservative renovations ( 10% REDUCED VAT - 50% TAX DEDUCTION)
Purchase of goods, with the exclusion of raw materials and semi-finished products, used in conservative restoration and building renovation. Use for the purchase of LED lighting is permitted .
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for renovation and restoration, VAT 10%" in the same 'Order note' field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT reduced at 4% for the construction of the first non-luxury home
The use of LED lighting for the purchase of non-luxury properties is permitted (the property must not have luxury characteristics, according to the criteria indicated in the decree of 2 August 1969).
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for the facilitation of construction of a first home, VAT 4%" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
Furniture Bonus
Purchase of Furniture and Appliances, including LED lighting for private individuals and condominiums. Legislative decree no. 63/2013 introduced a further 50% deduction for the purchase of furniture and large appliances and LED lighting, aimed at furnishing properties undergoing renovation.
The main prerequisite for obtaining the deduction is the carrying out of a recovery intervention on the building heritage (renovation, restoration, etc.).
It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and "advance invoice for mobile bonuses" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT exemption with Reverse Charge and Split Payment
To take advantage of reverse charge and split payment on Oniroview.com, Public Administration suppliers and companies that perform services through procurement and subcontracting contracts must follow this procedure:
- Complete the order on our website by selecting "Bank transfer" as the payment method.
- Specify in the order notes that you have the necessary documentation for VAT-free payment.
- Send the documentation to facilitazioni@oniroview.com , including the order reference.
After verifying the documentation, we will issue an advance invoice with the reduced VAT to proceed with the payment.







