The 50mt 1080p hdmi extenders on ethernet cable allow you to increase the maximum distance to carry the high definition video signal (1080p) that comes out of the hdmi port of a source such as blue-ray players, computers but above all for sky Q decoders HD to a tv monitor.
The CT374 / 9POE extender is suitable for extending the length of HDMI cables using a single Cat.6 ethernet cable ( IEEE-568B connection standard) and consists of a transmitter and a receiver. In this way it is possible to transmit up to 50mt by sending a 1080p signal at 30hz and up to 30mt with a1080p signal at 60hz without signal degradation. It is the ideal solution for home use and show rooms, security applications, conference rooms, schools and training and video surveillance environments.
The hdmi extender also implements an hdmi loop-out which allows the hdmi signal to be split directly from the transmitter so that a monitor can be connected close to the video source. In this way it will be possible to extend the signal via cat.6 cable and split the signal without having to resort to other devices, making installation quicker and cleaner.
The hdmi extender also supports remote control of the remote control signal via an infrared receiver and transmitter. This function is very convenient in situations where it is necessary to control the source remotely. The signal is sent on the LAN cable and received by the player (DVD player, satellite decoder, sky etc.)
The transmitter is equipped with DIP switches for configuring the EDID .
The receiver is equipped with a button for automatic equalization of the length of the transmission cable.
PLEASE NOTE:
The maximum distance supported depends on the resolution of the signal and above all on the quality of the ethernet cable used.
It is recommended to use a cable of minimum category cat.6 in pure copper.
Specifications
- Pair of plug-and-play modules, TX + RX
- Extension on single CAT.6 IEEE-568B cable
- HDMI signal local repetition
- Supported Resolutions: 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz, 720p @ 50 / 60Hz, 1080i @ 50 / 60Hz, 1080p @ 60Hz
- Signal transmission distance:
- max 50m (480i @ 60Hz, 480p @ 60Hz, 576i @ 60Hz, 576p @ 60Hz, 720p @ 50 / 60Hz, 1080i @ 50 / 60Hz, 1080p @ 30Hz)
- max 30m (1080p @ 60Hz 8bit) using Cat.6 AWG24 cable.
- Supports transmission of IR signals, 20-60kHz
Connections
Transmitter
- HDMI connector (Input)
- HDMI connector (Out)
- RJ45 connector
- Jack 3.5 connector - IR output
- DIP switch EDID
Receiver
- HDMI connector (Out)
- RJ45 connector
- Jack 3.5 connector - IR input
Caution
- The device does not support the transmission of IR signals over HDMI cables. CT500 accessories not compatible.
- Plug and play installation, no drivers or software required
Package contents
1x Transmitter
1x Receiver
1x 5Vdc 2A power supplies (conn. 5,5-2,1mm positive center)
1x IR receiver cable
1x IR transmitter cable
Features
3D compatible |
yes |
|
Maximum resolution |
1080p @ 60Hz |
4K compatible |
no |
|
Technology |
Standard 1xCat. 5e / 6 |
Distance Extender |
50 m |
|
Extender type |
HDMI® |
Additional functions |
IR, Loop-Out, PoE |
|
Typology |
Transmitter + Receiver |
Color depth |
8 bits / channel |
|
General features