Small and powerful 120W 12V 24V 10A dimmer for LEDs (240W if at 24V)
Dimmer for Led Strips suitable for 503 boxes capable of regulating the luminous intensity of 12/24V single-color LED strips with a maximum load of 10A, translated into power they are 120W if used with 12V LED strips or 240W using 24V LED strips.
The dimmer is controlled by a civil series opto-isolated button suitably installed on the PP terminals. Button not supplied.
The device keeps the memory of the last operating mode set even after switching the power off and on again.
The button input is opto-isolated. It means more robust to interference that can be picked up by the button cable. You will no longer have false ignition problems.
Thanks to its compact size, the ALC022 dimmer can be installed in 503 boxes. You can easily cash it in or hide it in small containers, making installation easier.
Dimensions : length: 48.8mm, width: 48.8mm, height: 24mm
Degree of protection: IP20
Body material: Plastic
Body Color: White
NB: For lighting systems with powers higher than 120W at 12Vdc and 240W at 24Vdc, ALC022 must necessarily be combined with an amplifier to ensure uniform control of all the connected loads. We propose the ALC020 model as a solution, an amplifier for single-color LED strips 12/24Vdc - 10A
Control type
Command: NO button
Button control mode
Operation
- Click: on/off.
- Long press when on: increase/decrease intensity. Minimum brightness: 2.5% (not editable).
- Long press from off: activation of "courtesy light" mode (Default 10%). This intensity is modifiable (by setting a value between 2.5% and 10%).
Protections
Overtemperature,
Polarity reversal
Overload
Short circuit at the output
Overfeeding
Under-feeding
General characteristics
Function: Controllers
Suitable for: Single colour
Control method: Push button
Electrical characteristics
Regulation type: Constant voltage (CV)
Input voltage: 12/24V
Output voltage: same as input
Output type: terminals
Connection method: common anode
Current/Ch: 10A
no. channels: 1
Rated power (12V): 120W
Rated power (24V): 240W
Thermal characteristics
Operating temperature: -10 / 40°C
Note
Installation must only be performed by qualified personnel.
The product must be installed inside an electrical panel.
Install a suitable fuse at the input of the device.
The power supply must be chosen according to the LED load connected for voltage and current.
Use a power supply with a higher power rating than the load to be powered (approximately 30%).
General characteristics
| Suitable for |
One color |
|
Control method |
Button |
| Function |
Controllers |
|
Brand |
JOlight |
|
|
Electrical characteristics
| Current/Ch |
10 A |
|
Input voltage |
12/24V |
| Connection method |
common anode |
|
Output voltage |
as an entrance |
| no. channels |
1 |
|
Output type |
clamps |
| Rated power (12V) |
120W |
|
Regulation type |
Constant Voltage (CV) |
| Rated power (24V) |
240W |
|
|
|
|
|
Mechanical characteristics
| Height |
24mm |
|
Length |
48.8mm |
| Body color |
White |
|
Length |
48.8mm |
| Degree of protection |
IP20 |
|
Body material |
Plastic |
|
|
|
Thermal characteristics
| Operating temp |
-10 / 40 °C |
