Armadio Rack a Muro 19" 6U 600x450 Porta in Vetro Nero
Secure Checkout
Pickup available at Sede Operativa Oniroview Usually ready in 24 hours
Pickup available
-
Sede Operativa Oniroview
Pickup available, usually ready in 24 hours
Via Piave 17
Check in google map
95129 Catania CT
Italy
Frequently Bought Together
Armadio Rack a Muro 19" 6U 600x450 Porta in Vetro Nero
📐 Rack 19" 6U │ 600 × 450 × 370 mm │ Profondità utile 350 mm — 🔧 Difficoltà installazione: 2/5 │ 🎯 Ideale per: ONT, router, switch e patch panel in casa o in piccoli uffici
Armadio rack piccolo da 6 unità: 37 cm di altezza per la rete di casa e del piccolo ufficio
Sporge dal muro 450 mm, 15 cm meno della versione da 600: è l'armadio rack piccolo della serie RW1A di Alpha Elettronica, con 6 unità in 370 mm di altezza.
In questo armadio rack 6U entrano apparati 19" profondi fino a 350 mm, come switch, router e patch panel. Arriva già assemblato, con porta in vetro temprato da 4 mm e serratura a chiave.
Chi lo sceglie
- 🏠 Rete di casa: ONT della fibra, router e switch raccolti in un ripostiglio.
- 🏢 Piccoli uffici e negozi: un patch panel, uno switch e un piccolo NVR appoggiato su ripiano.
- ⛔ Non è la scelta giusta se devi montare apparati più profondi di 350 mm o un UPS rack: serve la profondità 600 mm.
Analisi tecnica e vantaggi dell'armadio rack 6U a muro
- 📏 6U, cioè 266,7 mm di montaggio — con l'unità da 44,45 mm della norma EIA-310 ci stanno patch panel, passacavi, switch e ripiano da 1U ciascuno, con 2U di riserva.
- 🔩 Profondità utile da 70 a 350 mm — i 4 montanti regolabili (2 anteriori e 2 posteriori) si spostano in profondità e si adattano alla lunghezza degli apparati.
- 🚪 Porta in vetro temprato 4 mm, apertura 230° — si apre 50° oltre il piano frontale, è reversibile e si chiude con serratura a camma a 1/4 di giro.
- 🔐 Pannelli laterali asportabili con chiave — lavori sui cavi dal fianco senza smontare gli apparati; il pannello posteriore è fisso e chiude il lato verso il muro.
- ⚖️ Portata statica 60 kg — è il dato dell'armadio: la tenuta reale dipende dalla parete e dai tasselli, da scegliere in base al supporto.
- 🌬️ Ingresso cavi da tetto e fondo — i cavi entrano dal lato più comodo; il tetto è predisposto anche per la ventilazione.
- 🛡️ Acciaio SPCC nero RAL 9004, IP20 — lamiera d'acciaio laminata a freddo con grado di protezione IP20: va installato solo in ambienti interni.
Scheda tecnica
| Produttore | Alpha Elettronica |
| Caratteristiche generali | |
| Tipo di cabinet | Armadio rack |
| Assemblaggio | Assemblato |
| Colore | Nero (RAL 9004) |
| Installazione | |
| Luogo d'impiego | Interno |
| Montaggio | A parete |
| Compatibilità rack | 19" |
| Unità rack | 6U |
| Caratteristiche meccaniche | |
| Materiale corpo | Acciaio SPCC laminato a freddo |
| Fissaggio | Viti con tasselli |
| Portata statica | 60 kg |
| Profondità utile min | 70 mm |
| Profondità utile | 350 mm |
| Dimensioni | 600 × 450 × 370 mm (L × P × H) |
| Grado di protezione | IP20 |
| Porta anteriore | |
| Aspetto porta anteriore | Vetro temprato trasparente 4 mm |
| Porta anteriore asportabile | Sì |
| Tipo chiusura porta anteriore | Chiave |
| Serratura porta anteriore | Serratura a camma con chiave a 1/4 di giro |
| Apertura max | 230° |
| Porta anteriore reversibile | Sì |
| Pannello posteriore | |
| Aspetto pannello posteriore | Cieco |
| Pannello posteriore asportabile | No |
| Pannelli laterali | |
| Aspetto pannelli laterali | Ciechi |
| Pannelli laterali asportabili | Sì |
| Tipo chiusura pannelli laterali | Chiave |
| Serratura pannelli laterali | Serratura a camma con chiave a 1/4 di giro |
| Tetto | |
| Predisposizione per ventilazione | Sì |
| Predisposizione per ingresso cavi tetto | Sì |
| Montanti | |
| Tipo montanti | Regolabili (2 anteriori + 2 posteriori) |
| Fondo | |
| Predisposizione per ingresso cavi fondo | Sì |
| Codici prodotto | |
| SKU | RW1A06U64B00 |
| EAN | 8017443698369 |

💡 Il consiglio di Simone — Oniroview
Per far chiudere la porta senza schiacciare i cavi, misura la profondità del tuo apparato più lungo e aggiungi l'ingombro dei connettori sul retro: la somma deve restare sotto i 350 mm utili. L'ONT della fibra e il router dell'operatore non sono rackabili, quindi mettili su un ripiano 1U: per gli armadi da 450 mm offre un piano di 470 × 280 mm.
Completa il tuo progetto
- 🔗 Ripiano fisso 1U per armadi a muro da 450 mm — piano da 470 × 280 mm per ONT, router e alimentatori.
- 🔗 Pannello passacavi rack 19" 1U a 5 anelli — tiene in ordine le patch cord sotto il patch panel.
- 🔗 Armadio rack a muro 6U 600x600 — stessa altezza, con profondità esterna di 600 mm.
Domande frequenti
Quanto è profondo all'interno un armadio rack da 450 mm?
Al massimo 350 mm: è la profondità utile dichiarata dal produttore per questo modello da 450 mm esterni, mentre il resto è occupato da porta in vetro, struttura e pannello posteriore. Misura l'apparato più lungo compresi i connettori: se supera questa quota, valuta la profondità 600 mm della stessa serie.
Come si fissa un armadio rack a muro?
Con viti e tasselli, che il produttore indica come sistema di fissaggio ma non elenca tra i contenuti della confezione: scegli quelli adatti alla tua parete. L'armadio arriva assemblato: tracci i fori, lo fissi in bolla e poi monti gli apparati.
Un armadio rack per la casa da 6U è sufficiente?
Sì, se l'impianto è contenuto: un patch panel da 24 porte, uno switch e un pannello passacavi occupano 3U, e ne restano 3 per un ripiano e per le aggiunte future. Se prevedi un NVR rack, un UPS o apparati lunghi, servono più unità e più profondità, come nei modelli 9U e 12U da 600 mm.
Garanzia e sicurezza
📜 Garanzia legale 2 anni (D.Lgs. 170/2021) │ ⚠️ Grado di protezione IP20: solo per ambienti interni │ ⚠️ Fissa l'armadio a una parete in grado di reggere armadio e apparati, con tasselli adatti al supporto.
Spedizione da Catania. Assistenza tecnica per la scelta e il cablaggio dell'armadio rack.
Changed your mind? Here's what to do
If you want to return your order, we're here to help. You have the right to withdraw from the purchase within 14 days of delivery, without having to provide any reason.
Right of withdrawal (within 14 days)
The deadline is 14 days from delivery. If the order includes multiple items delivered separately, the deadline starts from the delivery of the last item.
The 14 days are calculated in calendar days, including Saturdays, Sundays, and public holidays. If the last day falls on a Saturday, Sunday, or public holiday, the deadline is extended to the next working day.
How to exercise it: Initiate the request from the dedicated function in your account: https://account.oniroview.com → Orders section → "Manage" → "Request Return". The withdrawal is validly exercised at the moment you send the online request; it is not subject to our prior authorization.
- Return: You must send the products back within 14 days from the date you notified us of the withdrawal.
- Refund: We will refund you within 14 days of the withdrawal notification. We may withhold the refund until we have received the goods or proof of their shipment, whichever occurs first.
- Full withdrawal (you return all products in the order): 100% refund of the price plus standard outbound shipping costs. If you chose a more expensive delivery than the standard one at the time of the order, any supplement is not refundable.
- Partial withdrawal (you return only some products): refund of the price of only the returned products; outbound shipping costs are not refunded. If the order benefited from free shipping due to reaching a threshold and the partial return causes the value to fall below that threshold, the corresponding shipping cost will be calculated and deducted from the refund.
- Return costs: The direct costs of return are borne by the customer.
- Diminution in value: You are only responsible for any diminution in the value of the goods resulting from handling other than what is necessary to establish their nature, characteristics, and functioning. In such a case, we will deduct from the refund an amount corresponding to the ascertained lost value.
The refund will be made using the same payment method used for the purchase.
Exclusions from the right of withdrawal
Pursuant to Article 59 of the Consumer Code, withdrawal does not apply to:
- goods made to measure or clearly personalized (e.g., cables cut to size, custom configurations);
- sealed goods that are not suitable for return for hygienic reasons or health protection, if unsealed after delivery;
- digital content supplied on a non-material medium, if the performance has begun with your prior consent and acceptance of the loss of the right of withdrawal.
Outlet Items: Items in the Outlet category are sold as final sale and are not returnable.
B2B Sales: The right of withdrawal does not apply to contracts concluded with customers holding a VAT number.
How to ship the return
Once the request has been submitted, send all items to: Oniroview, Via Piave 17, 95129 Catania (CT), Italy.
- Pack carefully and use secure, tracked shipping: products lost or damaged during return transit cannot be refunded.
- To protect the original packaging, place it in a second box when possible. Do not apply labels or adhesive tape directly to the product's original packaging.
Tax deductions and benefits for ordinary and extraordinary maintenance
To request tax breaks, send your request to the email address: amministrazione@oniroview.com
IRPEF deductions at 50%
You are entitled to a 50% deduction for the purchase of products connected to building interventions, such as electrical systems, video intercoms and alarm systems and LED lighting. It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate the desired deduction in the order notes.
- Make the payment via bank transfer, compliant with the provisions of the Revenue Agency. The transfer must include:
- Reason for payment (include order number and date)
- Oniroview tax code and/or VAT number: 05660420877
- Tax code of the payer
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
10% reduced VAT for building renovations and conservative renovations ( 10% REDUCED VAT - 50% TAX DEDUCTION)
Purchase of goods, with the exclusion of raw materials and semi-finished products, used in conservative restoration and building renovation. Use for the purchase of LED lighting is permitted .
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for renovation and restoration, VAT 10%" in the same 'Order note' field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT reduced at 4% for the construction of the first non-luxury home
The use of LED lighting for the purchase of non-luxury properties is permitted (the property must not have luxury characteristics, according to the criteria indicated in the decree of 2 August 1969).
Requested documents:
-
Copy of Identity Card
-
Copy of valid tax code or health card
-
Copy of DIA or SCIA or CIL (or building permit) where the "Type of intervention" is indicated
-
Declaration for reduced VAT ( download the form here )
The documents indicated above must be sent to the email address amministrazione@oniroview.com , after completing the order. Once the documentation has been verified, we will issue an advance invoice with the reduced VAT to proceed with the payment.
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and advance invoice for the facilitation of construction of a first home, VAT 4%" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
Furniture Bonus
Purchase of Furniture and Appliances, including LED lighting for private individuals and condominiums. Legislative decree no. 63/2013 introduced a further 50% deduction for the purchase of furniture and large appliances and LED lighting, aimed at furnishing properties undergoing renovation.
The main prerequisite for obtaining the deduction is the carrying out of a recovery intervention on the building heritage (renovation, restoration, etc.).
It is not required to send any documents to our company. To take advantage of the deduction, simply indicate the total expense in your 730 or in the Unico form.
The documents to be kept are:
- Bank transfer receipt
- Purchase invoices showing the nature, quality and quantity of the goods purchased and, preferably, the buyer's tax code
Procedure to follow:
- Place an order on our site by selecting "Bank Transfer" as the payment method.
- Request the invoice and indicate in the order notes by writing "your tax code and "advance invoice for mobile bonuses" in the same field.
- Make the payment via bank transfer indicating the invoice number
In the absence of even one of the two fields indicated above, the order will be processed without invoicing.
VAT exemption with Reverse Charge and Split Payment
To take advantage of reverse charge and split payment on Oniroview.com, Public Administration suppliers and companies that perform services through procurement and subcontracting contracts must follow this procedure:
- Complete the order on our website by selecting "Bank transfer" as the payment method.
- Specify in the order notes that you have the necessary documentation for VAT-free payment.
- Send the documentation to facilitazioni@oniroview.com , including the order reference.
After verifying the documentation, we will issue an advance invoice with the reduced VAT to proceed with the payment.
















