Motorized TV Mounts
Filter
Sort by:
Motorized TV mounts: control the rotation, don't push it
A manual swivel mount is moved by hand, every time, by getting off the sofa. A motorized mount performs the same movement via an RF remote or an app on your phone. It makes sense in two specific situations: in open-plan spaces, where the same television is watched from both the sofa and the dining table, and in commercial installations—bars, gyms, showrooms, waiting rooms—where the orientation changes depending on where the audience is located and the screen is out of reach.
Selection table
| Where you install it | Mount | Control |
|---|---|---|
| Living room wall, open space | Motorized wall mount 32-80 inches, rotation up to 170° | RF remote |
| No suitable wall: bar, gym, shop window | Motorized ceiling mount 23-55 inches, tiltable | Remote + Wi-Fi via app |
| Ceiling, large screens in public environments | Motorized ceiling mount 32-75 or 32-80 inches | RF remote |
| Non-drillable wall, but rotation is needed | Motorized floor mount 37-80 inches | RF remote + Tuya app |
Three things to plan before ordering
Mount power supply. This is the point that ruins the most installations: the motor needs its own power, the television socket is not enough. On a wall, this is usually solved with the same junction box; for the ceiling, it must be planned before closing the false ceiling or running the conduits.
Rotation space. A 170° rotation means the screen can extend several centimeters from the wall line. Verify that it doesn't hit a bookcase, a corner, or a door along its arc, and consider the slack of the cables behind: they must follow the movement without pulling.
Load capacity and VESA. As with any mount, the actual weight of the screen and the distance between the four rear holes matter. With motorized mounts, you should use a larger margin: the motor moves a mass on a lever, it doesn't just hold it still.
Expert advice. On motorized units, the remote is radio frequency, not infrared: it works without pointing and through furniture, but if there are other RF devices in the house, it is worth checking that they do not overlap. On Wi-Fi models, remember that without a network, the mount still functions via remote: the app adds stored positions and automations, it is not essential. And always leave a generous cable loop behind the screen: it is the first thing that tears when the motor makes its first full cycle.
Frequently asked questions
Can the motorized mount be controlled from a phone?
Wi-Fi models can, via an app, as well as by RF remote. The others are remote-only. In commercial installations, the app is convenient because it allows you to recall stored positions without having to look for the remote behind the counter.
Is a dedicated socket needed?
Yes, the mount needs power. In most wall installations, the same junction box as the television is used; for ceilings, a dedicated line must be brought in, and it must be done before assembly.
How much noise does the motor make?
It is a low hum that lasts for the few seconds of the movement, not a continuous operation. In a domestic environment, it is barely audible over the normal volume of the television.
If the power goes out, does the screen stay locked?
It stays in the position it is in: the mechanisms are irreversible, so the screen does not move or fall. When power returns, the mount starts again from there, without needing to recalibrate.
See also wall TV mounts, ceiling TV mounts and floor TV stands and carts.
