The hdmi over ip extenders allow you to increase the maximum distance to carry the high definition video signal (1080p) that comes out from the hdmi port of a source such as blu-ray players, computers but also for sky Q HD decoders to one or multiple tv monitors.
This exdender over ip up to 120mt is an additional receiver for the CT375 / 1/9 extender. By connecting several over IP receivers to the same gigabit network, it is possible to send the source signal to as many TV monitors.
The signal sent will be at an hdmi 1080p fullhd 12bit resolution without signal loss up to a maximum distance of 120mt . The bandwidth is up to 10.2Gbps.
The pair of exdenter over ip can work in two modes:
- Point-to -Point Connection : The transmitter is connected directly to the receiver via a cat.6 lan cable
- Point-to-Multipoint Connection : The transmitter is connected to a gigabit switch within an existing LAN (Cat.6) network and multiple receivers. In this case it is necessary to purchase the additional receivers.
PLEASE NOTE : fundamental requirements for correct operation are the use of cat.6 ethernet cables and the presence of a GIGABIT 10/100/1000 Switch with support for IGMP Multicast . Approximate price for these switches 60 - 70 euros
It is possible to use "cheap" gigabit 10/100/1000 switches ONLY IF:
1. A maximum of 1 only CT379T is connected to the switch, and ...
2. Only CT379Rs (1 or more) are connected to the switch, and ...
3. NO other devices other than the CT379T or CT379R are connected to the switch.
Compatible Models:
D-Link EasySmart DGS-1100-05, DGS-1100-08, DGS-1100-16, DGS-1100-24
D-Link SmartSwitch DGS-1210-08, DGS-1210-16, DGS-1210-24, DGS-1210-48
TP-Link TL-SG2008, TL-SG2216, TL-SG2424, TL-SG2452
The hdmi extender is powered (two power supplies included), this allows the transmitter and receiver to send the amplified and equalized signal to obtain the best performance without signal loss.
Specifications
- Extension on single CAT.6 IEEE-568B cable
- Signal transmission distance:
- max 120m (1080p 12bit), using CAT.6 cable
HDMI specifications
- Bluray and HD DVD in Full HD (1080p)
- Bandwidth up to 10.2Gbps
Caution
- The Gigabit Ethernet switch must support IGMP multicast for the devices to function properly.
- The device does not support the transmission of IR signals over HDMI cables. CT500 accessories not compatible.
- Plug and play installation, no drivers or software required
Package contents
1 x Receiver
1 x 5Vdc 1A power supplies (conn. 5,5-2,1mm positive center)
* Maximum distance of the section defined by the Ethernet standard 802.3ab 1000Base-T (TX).
* Maximum bandwidth of the extender: 80-100Mbit
Distance Extender |
120 m |
Technology |
Over IP (LAN) |
Extender type |
HDMI® |