Online UPS with 2000VA double conversion display rack / tower mounting version
The JOpower online UPS of the KUPSP series are uninterruptible power supplies with Online technology with sinusoidal output with low frequency technology and electronic AVR voltage stabilization circuit .
19 "Rack (2U) or Tower installation with adjustable display
Battery recharging system managed by microprocessor and USB HID interface.
They are capable of delivering powers between 1000VA and 3000VA. They are made with microprocessor control and are equipped with an integrated self-diagnostic function and cold start function.
The 2000VA rack or tower mount version has 8 three-pole IEC320 C13 sockets, 1800W effective load.
Online technology is identified with the acronym VFI (Voltage and Frequency Independent). Commonly called " double conversion ", during operation in the presence of the mains, the UPS output is powered by the combination of a rectifier which converts the UPS input voltage from alternating to direct and inverter which transforms the direct voltage again alternating. This system ensures that the voltage present at the UPS output is perfectly sinusoidal, clean and very stable both in voltage and in frequency regardless of the problems present on the power supply network.
They are internally equipped with hermetic lead -acid storage batteries regulated by a valve to guarantee a minimum autonomy of 5 minutes at 80% of the load.
The presence of an electronic stabilizer (AVR - Automatic Voltage Regulator) inside the UPS ensures effective protection of the connected loads, against disturbances in the electrical network that can cause malfunctions and damage to the electronics.
Ideal for professional uses such as: Server, Workstation, Switch, HUB, Video surveillance systems, Home Theater, TV, HI-FI.
Power factor 0.9
Sinusoidal output
AVR voltage stabilization electronic circuit
19 "Rack (2U) or Tower installation with adjustable display
Easy battery replacement
Static bypass
Compatibility with generator
Battery recharging system managed by a microprocessor
USB HID interface
System requirements
Server, Workstation, Switch, HUB, Video surveillance systems, Home Theater, TV, HI-FI, Fireplaces.
Battery type: Lead acid, sealed, maintenance free
Indicative autonomy: 15min (25%) - 6min (50%) - 2min (75%) - 1min (100%)
The backup time may vary according to the absorption of the connected loads.
Connections and views
USB for viewing the operating status via software (supplied).
RJ45 (Network / Fax / Modem) for telephone line protection.
Display for indicating the operating status.
Warnings
The batteries used are sealed lead-acid batteries only.
Connections
Input connections |
IEC320 C14 |
|
Remote control |
no |
Output connections |
8 IEC320 C13 connectors |
|
Installation |
rack, vertical / tower |
Protections
Entrance protections |
panel fuses |
Output protections |
overload, short circuit |
Mechanical characteristics
Dimensions |
430mm x 438mm x 88mm |
|
Protection |
IP20 |
Weight |
17.2 Kg |
|
General features
Battery capacity |
4 x 9Ah 48V |
|
Intervention time |
0 ms |
Output waveform |
Pure sine wave |
|
Battery recharge time (90%) |
4 hr |
Frequency |
50/60 Hz |
|
Input voltage |
230Vac (80-300Vac) |
Power |
2000VA - 1800W |
|
Output voltage |
208-240Vac |
Technology |
Online UPS |
|
Typology |
Single phase |