The hdmi extenders on ethernet cable allow you to increase the maximum distance to carry the high definition video signal (1080p) that comes out of the hdmi port of a source such as blu-ray players, computers but above all for sky HD decoders to a monitor TV.
The distribution of an hdmi signal places the installer the great limit of the length of the hdmi cable , in fact even using an excellent quality cable it is not possible to exceed 15 meters as long as there are underground pipes available capable of hosting the cables already terminated.
Hdmi extenders solve this problem and depending on the model and technology it is possible to distribute hdmi signals over considerable distances.
The CT373 / 9 extender is suitable for extending the length of HDMI cables using a single Cat.5e / 6 ethernet cable ( IEEE-568B connection standard) and consists of a transmitter unit and a receiver unit. In this way it is possible to transmit up to 50mt by sending a 1080pa 30hz signal without signal degradation. It is the ideal solution for home use and show rooms, security applications, conference rooms, schools and training and video surveillance environments.
The hdmi extender is powered (two power supplies included) , this allows the transmitter and receiver to send the amplified and equalized signal to obtain the best performance without signal loss.
The hdmi extender also supports remote control of the remote control signal via an infrared receiver and transmitter. This function is very convenient in situations where it is necessary to control the source remotely. The signal is sent on the LAN cable and received by the player (DVD player, satellite decoder, sky etc.)
PLEASE NOTE:
The maximum distance supported depends on the resolution of the signal and above all on the quality of the ethernet cable used.
It is recommended to use a cable of minimum category cat.6 in pure copper.
Specifications
- Pair of plug-and-play modules, TX + RX
- Extension on single CAT.6 IEEE-568B cable
- Supported Resolutions:
480i @ 60Hz, 480p @ 60Hz, 576i @ 60Hz, 576p @ 60Hz, 720p @ 50 / 60Hz, 1080i @ 50 / 60Hz, 1080p @ 30Hz, 1080p @ 50 / 60Hz
- Signal transmission distance:
- max 50m (480i @ 60Hz, 480p @ 60Hz, 576i @ 60Hz, 576p @ 60Hz, 720p @ 50 / 60Hz, 1080i @ 50 / 60Hz, 1080p @ 30Hz)
- max 30m (1080p @ 60Hz 8bit)
using Cat.5e / Cat.6 AWG24 cable.
- Supports transmission of IR signals, 20-60kHz
HDMI specifications
- Bluray and HD DVD in Full HD (1080p)
- Bandwidth up to 10.2Gbps total
Connections
Transmitter
- HDMI connector (Input)
- RJ45 connector
- Jack 3.5 connector - IR output
Receiver
- HDMI connector (Out)
- RJ45 connector
- Jack 3.5 connector - IR input
Caution
- The device does not support the transmission of IR signals over HDMI cables. CT500 accessories not compatible.
- Plug and play installation, no drivers or software required
Package contents
1x Transmitter
1x Receiver
2x 5Vdc 1A power supplies (conn. 5,5-2,1mm positive center)
1x IR receiver cable
1x IR transmitter cable
EXTENDER DISTANCE 50 m
TECHNOLOGY Standard 1xCat. 5e / 6
Features
3D compatible no Maximum resolution 1080p @ 60Hz
4K compatible no Standard 1xCat technology. 5e / 6
Extender distance 50 m Extender type HDMI®
Additional IR functions Transmitter + Receiver type
8 bit / channel color depth