Small and powerful 12V 24V 10A smart LED dimmer 120W (240W if 24V) controlled via App
Smart dimmer for single-color LED strips suitable for 503 boxes capable of regulating the luminous intensity of 12/24V LED strips and/or LED spotlights (constant voltage) with a maximum load of 10A, translated into power: 120W if used with LED strips 12V or 240W using 24V LED strip.
Light intensity control is performed via the SmartLife application , available for Android and iOS. The smart dimmer is also compatible with voice assistants such as Alexa and Google Home .
Through the Alexa app or the Google assistant you can turn on, off, adjust the intensity and color of the light simply using the voice command.
The smart LED strip dimmer is branded JOlight, designed and assembled in Italy by Alpha Elettronica which is synonymous with high quality and reliability.
The smart dimmer is protected against overtemperature, reverse polarity, overload, output short circuit, over-power and under-power.
Furthermore, the smart wifi dimemr allows you to:
- There remote management wherever you are thanks to the App on your smartphone, you can turn your LED strips on and off
- There management and programming to automatically turn the LED lights on and off at certain times
- You will be able to set rules and automations for scenarios to turn the lamps on and off when certain conditions occur
-
Consumption monitoring you will be able to view the mains voltage, current absorbed and consumption of the devices connected to the socket ( valid only for controlled smart sockets )
PLEASE NOTE: for correct use of the lamp, a 2.4ghz wi-fi network, free installation of the SMART LIFE app (free account creation) and pairing of the device with the Alexa or Google app is required.
Supported Wifi protocol: IEEE 802.11 b/g/n 2.4Ghz
General characteristics
Single color dimmer for LED strips and 12V or 24V constant voltage resistive LED sources. Light intensity control is performed via the SmartLife application, available for Android and iOS.
Operation
- Remotely On/Off via App
- Variation of light intensity
- Timer to turn on and off at the preset time
Electrical Characteristics
Regulation type: Constant voltage (CV)
Input voltage: 12/24V
Output voltage: same as input
Output type: terminals
Connection method: common anode
Current/Ch: 10A
n. channels: 1
Rated power (12V): 120W
Rated power (24V): 240W
Mechanical characteristics
Length: 48.8mm
Width: 48.8mm
Height: 24mm
Degree of protection: IP20
Body Material: Plastic
Body color: White
Thermal Characteristics
Operating temperature: -10 / 40°C
Note
Installation must be carried out only by qualified personnel.
The product must be installed inside an electrical panel.
Install a suitable fuse at the input of the device.
The power supply must be chosen based on the LED load connected for voltage and current.
Use a power supply with a nominal power greater than the load to be powered (approximately 30%).
In the event of a blackout, the ALC025 dimmer retains the memory:
- the operating mode (static or scene)
- the dimming intensity
It does not keep memory of the on/off status: when the power returns, the load is always on.
Any timers and programming remain saved in the cloud.
If a timed event occurs while the dimmer is not powered, the event may be lost.