The 4K 60hz 2.0 HDMI matrix with 4 inputs and 4 outputs , allows you to route each input source to each TV connected in output.
Compatible with the HDCP 2.2 protocol, this matrix represents the classic component that is used to distribute sources such as sat and DTT decoders, Blu-ray or DVD players, etc. in different rooms of the apartment and / or office.
The hdmi 4 in and 4 out matrix is the ultimate solution for restaurants , school education , meeting rooms , hospital sector and video surveillance.
ALL THE RESOLUTION AT YOUR FINGERTIPS
The matrix supports a bandwidth of 18 Gbps and all ultra HD (UHD) video signals up to 4096x2160p at 60Hz frequency. The matrix also supports HDR and CEC functions
AUTOMATIC 4K TO 1080P SCALER
All outputs of the matrix are equipped with a scaler function . The incoming 4K signal is reduced to 1080p for monitors that require it. The matrix therefore allows a mix of signals optimized at maximum resolution for each monitor without affecting the 4K source.
ADVANCED AUDIO SUPPORT
The matrix is equipped with the latest technology for managing the audio output EMBEDDED AUDIO. Audio support up to 7.1 channels ( LPCM, Dolby TrueHD and DTS-HD Master Audio ). It supports simultaneous output of coaxial and L / R audio signals
CONTROL VIA WEB PAGES
The matrix can be controlled via the buttons on the front panel, via the remote control, via the RS232 serial port and via the web interface. Configuration and control web pages can be accessed via IP address
ATTENTION TO THE LENGTH OF THE CABLES
The matrix supports the resolutions indicated for certain lengths of copper HDMI cables. For longer distances it is necessary to use HDMi fiber optic cables or HDMI extender.
PLEASE NOTE : in SCALER mode, the matrix does not allow HDR management.
The matrix outputs HDR only as long as all connected TVs are 4K and both support HDR. Warning: HDR often has to be enabled in the TV setup menu.
● Fully HDCP 2.2 compliant
● HDMI inputs and HDMI outputs support bandwidths up to 18 Gbps
● Routes up to four 4K HDR HDMI sources to four 4K HDR display devices such as TVs or projectors.
● Support 4K at 60Hz 4: 2: 0 | 4: 4: 4 and HDR
● Support simultaneous output of coaxial and L / R audio signals.
● Audio support up to 7.1ch (LPCM, Dolby TrueHD and DTS-HD Master Audio)
● Each HDMI output supports scaling up to 1080p without affecting the 4K source content
● Advanced EDID management.
● Control options via IR remote control, buttons, web interface over LAN and RS-232 serial control